A good laser engraving system, together with useful accessories, can Marking parts to perfection and making work much easier at the same time. Mobil-Mark has been developing customised special solutions for special requirements for a long time. These useful helpers in everyday practice is the extensive range of accessories. Like all Mobil-Mark products, the accessories are designed to be the to be the best and most well thought-out solution. There’s something for every need – and if not, we’ll change it for you!
Sealing units
The engraving lasers from Mobil-Mark permanently mark any material and any surface geometry – round and flat, large and small. To make this possible, workpiece-specific sealing units are available, with which the respective surface can be labelled.
Can be changed in no time
The respective sealing unit on the laser head can be replaced easily and safely.
No limitations
Even round tubes, spheres and workpiece corners are labelled accurately, evenly and precisely;
Large marking areas
Markings up to 100 mm x 100 mm in size can be produced in a single operation;
Individual solutions for special sizes
Mobil-Mark also develops customised sealing units for oversized labelling surfaces
Film dispensers
PVD coating materials such as titanium, gold or silver can be applied cleanly and reliably to ceramics, glass or metal using Mobil-Mark laser engraving. For this purpose, a film with the appropriate filler material must be placed on the workpiece before lasering; With the practical film dispenser, these two work steps can be combined in a time-efficient manner;
Can be attached in no time
The film dispenser is simply attached to the laser head as an attachment.
Quick, automated and easy to use
The foil dispenser speeds up and simplifies laser engraving with PVD coating material enormously.
No reworking needed
The filler material is melted cleanly and precisely.
For Quasar 20
The foil dispenser is designed for the Quasar engraving laser with 20 W output power
16-mm-wide films ready-made
Mobil-Mark films can be used to create labelling fields in sizes up to 25 mm x 16 mm
Extraction and filter units
The laser engraving of certain metals such as chrome-nickel steels and plastics produces harmful gases and vapours. Mobil-Mark offers two suitable extraction filter systems to prevent these from getting into the air we breathe, which can be connected to the laser marking system in just a few simple steps using Plug&Play to the laser marking system.
MM KFS FA1
Ideal for laser engraving on metals such as chrome-nickel steels Extracts and filters out gases and vapours
MM KFS FA5
Ideal for laser engraving on plastics such as ABS, SB or PP; It has an additional filter for the gases and vapours specifically generated from plastic
High filter capacity
Both models offer a filter monitoring system and energy efficiency
Please contact us to receive advice from our experts.
Let us know if you have any questions, requests or suggestions. We look forward to receiving your call, e-mail or message via our contact form.
Protective gas labelling module
For permanent corrosion-free engraving results on metals such as chrome-nickel steels are provided by the inert gas marking module from Mobil-Mark.
No costly, time-consuming passivation required after the fact
Reliable corrosion protection integrated into the engraving process
Proven effectiveness
Long-term salt spray tests have confirmed the corrosion resistance of the labelling produced in an inert gas atmosphere
Saves 50% more time
When using the shielding gas, the duration of the laser engraving of the workpiece is reduced by up to half
Mobile stand
The mobile stand is the perfect support for precise laser markings at different locations without manual operation.
Flexibility thanks to mobility
The stand, which can be extended up to 1.5 metres high, has four wheels and can be moved to the desired marking area. It can be fixed using roller brakes
Precise height adjustment
Crank along the vertical and horizontal axis
Precise positioning
The laser head is fixed to a holder for laser marking. There it can be swivelled through 90° and locked
Touch panel
The touch panel makes it possible to conveniently and efficiently configure the to configure marking or labelling.
Convenient for engraving that changes frequently
The labelling content can be entered and changed quickly and easily via the touch panel
Direct connection to laser PC
The computer integrated in the laser can be conveniently controlled via the remote desktop control function of the touch panel
Barcode reader
If predefined labelling layouts are laser engraved in a short time with constantly changing content, the barcode reader from Mobil-Mark is recommended.
Rapid input of any job
Easily possible via barcode
Simple installation
Tool-free connection via USB interface
Laserhandlingsystem
There is a customised handling system for optimum positioning of an engraving laser from Mobil-Mark. It makes handling the laser easier and minimises any holding errors of manual operation, which can lead to a reduction in the quality of the marking.
Articulated arm handling system with slots for laser head
Offers an operating radius of 1.5 m
Maximum flexibility
For perfect laser engravings from the front, left, right and top, the labelling head can be rotated (approx. +/- 90°) and swivelled (approx. 0-100°)
Precise position
In the approached labelling position, the joints of the handling system are held in position by spring-applied brakes. The spring-applied brakes are actuated pneumatically
Laser head holder
For ergonomically optimised, back-friendly workplace conditions – especially in large series production – the laser head holder allows the hand-held control unit of the engraving laser to float.
Simplifies and expedites manual laser engraving
Hovering device enables the laser head to be pulled to the workpiece quickly and with little effort
Easy to mount
Can be combined with any commercially available balancer
Please contact us to receive advice from our experts.
Let us know if you have any questions, requests or suggestions. We look forward to receiving your call, e-mail or message via our contact form.
Suction cup holder
For precise laser engraving on all smooth surfaces, the suction cup holder serves as a reliable holding device for the laser head.
Two models available
Suction foot holder for any smooth surface, magnetic foot holder for magnetisable workpieces
Prevents the laser head from slipping
Perfect results with manual application
Precise adjustment
Height-adjustable and lockable in a few simple steps. An integrated spirit level facilitates alignment
Fully compatible
Can be combined with both the Nova-f ceramic laser and the Quasar universal laser
Magnetic foot holder
For precise laser engraving on smooth, magnetic surfaces, the magnetic base holder serves as a reliable holding device for the laser head.
Two models available
Magnetic base holder for magnetisable workpieces, suction base holder for any smooth surface
Prevents the laser head from slipping
Perfect results with manual application
Precise adjustment
Height-adjustable and lockable in a few simple steps. An integrated spirit level facilitates alignment
Fully compatible
Can be combined with both the Nova-f ceramic laser and the Quasar universal laser
Parallel gripping system
If very hard materials or parts are to be marked using deep laser engraving, long labelling times and therefore a fixed position of the laser head are required.
Keeps laser reliably fixed on the component
The parallel gripping system has a firm grip on the laser head
Precision included
The system ensures that the laser engraving is always exactly centred
WiFi controller
Engraving jobs can be transferred to the laser engraving machines particularly quickly and conveniently via WiFi. The WiFi controller is available for this. It simply needs to be plugged into a USB interface of the laser and establishes the wireless connection to a WiFi network on site.
Meets common standards
Rapid signal transmission
The maximum data transmission is up to 150 Mbit/s (2.4 GHz) or 433 Mbit/s (5 GHz).
Scissor lift table trolley with spindle
To facilitate reproducible laser marking – for example in small batches – the scissor lift table trolley is an ideal helper: workpieces to be engraved can be precisely positioned on it. The table height can be adjusted with millimetre precision via the spindle using the associated hand crank or with a cordless screwdriver.
Does not drop
The working height remains reliably unchanged even after prolonged use.
Precise positioning
The practical Swivel and fixed castors for effortless manoeuvring have a parking brake for precise positioning.
Long service life & high load capacity
The trolley is made of steel and powder-coated. It is designed for a load capacity of up to 300 kg
Height is easy to adjust
Spray coatings
Apply, dry, laser mark, remove excess material: In these four steps, you can apply the spray coatings to glass or ceramics and then laser mark them. Several colour variants are available.
Quick drying
The applied colour is completely dry within just 1-2 minutes. After the drying process, the laser melts the corresponding colour onto the workpiece to be marked using the energy of the laser beam.
Easy to remove excess colour
Residues can then be removed with a cloth.
Markiertisch
For stationary laser engraving at a workstation that optionally also mobile, we recommend the new marking table. It has a grooved plate with an optional clamping device on which your components can be placed precisely. The laser head can then be attached to a axis system can be fixed and moved up and down either manually or automatically. Even heavy components (up to 120 kg) can be positioned for engraving. The table is ideal for everything from individual parts to large-scale production; At the same time, ergonomic working is possible here, as the employee does not have to guide the laser, but only feed it.
Customised on request
Among other things, the table can be customised, automated and fitted with castors
Additional storage space
thanks to lockable drawers