Laser labelling plastic
Plastic objects of any kind can be marked with the Quasar laser engraving machine from Mobil-Mark – including materials such as polycarbonate, polyamide, polyester, ABS and silicone. Barcodes, logos, lettering or numbers: they can all be laser-engraved in seconds, the marking is permanently abrasion-resistant and is gentle on the material. Workpieces with any type of surface can be marked, because the customisable sealing units for the laser head of the Quasar allow the laser head to be adapted to every component. The sealing units can also be changed in no time – they are even ideal for the cost-effective labelling of small batches.
Examples of use
Common areas of application for the Mobil-Mark lasers include the marking of the following plastics:
Garbage can component
Thermal insulation board
Heat exchanger tube
Various marking processes on plastic
Foaming
Position laser head on workpiece, apply laser, job done. The gas bubbles that develop on the surface cause a colour change (lighter, white or grey, depending on the material), and a slightly raised marking is created.
Carbonisation
Position laser head on workpiece, apply laser, job done. The result is a sharp-edged engraving that varies in darkness depending on the material.
Please contact us to receive advice from our experts.
Let us know if you have any questions, requests or suggestions. We look forward to receiving your call, e-mail or message via our contact form.
Comprehensive range of accessories to allow customisation for every application.
The Mobil-Mark engraving lasers can be optimally equipped for any individual area of application in plastics marking. To that end, Mobil-Mark offers a broad range of accessories that precisely optimise the laser for every application. Below are a few examples.
Extraction and filter units
The extraction and filter units from Mobil-Mark reliably filter the gases and vapours generated during the marking process. They are available in two versions.
Sealing units
The sealing units from Mobil-Mark are available for every surface of the item to be marked. They can be attached to the laser head in no time.
Laser protection housing
The laser protection housing is an ideal tool if the mobile engraving lasers from Mobil-Mark are primarily going to be used in a stationary position.
Vertical stand
If a Mobil-Mark laser engraving machine needs to work in a stationary position, we recommend using a practical vertical stand.